Will it fit through the door?

Use the free furniture fit calculator to check a sofa, couch or other large item.

1 Item dimensions

2 Door and space

?

Enter your measurements

We will test the main orientations and angles through the doorway.

Ready
Doorway preview
How to use it
  1. Measure the widest, tallest and longest parts of the item.
  2. Measure the clear opening of the doorway, not the door itself.
  3. Add the hallway width if space to turn is limited.
This is a geometry guide, not a guarantee. Handles, feet, door frames, skirting boards, stairs and tight corners can reduce the usable space. Leave a few centimetres of clearance where possible.

Furniture fit calculator for doors and hallways

Fit Through Door helps you check whether large furniture can pass through a doorway before you buy it, move it or discover the problem at the door. The calculator compares the item with the clear doorway opening, tests the main faces of the item and checks rotated positions from 0° to 90° when tilting is allowed.

Will my sofa or couch fit through the door?

A sofa does not always have to pass through a doorway in its normal upright position. Movers often turn a sofa onto its side, stand it on one end or rotate it through the opening. That means a couch can sometimes fit through a door even when one of its normal measurements is wider than the door.

Enter the sofa length, width and height above, then add the clear doorway width and height. If there is a narrow hall or landing beside the door, include that too because the item may need space to turn before the widest point clears the frame.

How to measure furniture for a doorway

Measure the item at its largest outside dimensions. For a sofa or couch, include the arms, back and any fixed feet. For a fridge or wardrobe, include fixed handles, hinges and trim. If a part will definitely be removed before moving, measure again without that part.

For the doorway, measure the usable opening rather than the nominal door size. Measure between the narrowest points with the door fully open and from the floor to the lowest part of the frame. Door stops, hinges and handles can reduce the real opening.

What can you check?

Sofa and couch fit

Check whether a sofa, couch, armchair or sectional piece can go through a doorway straight, on its side or at an angle.

Fridge fit

Compare the outside dimensions of a fridge or freezer with the clear door opening. Include handles unless they will be removed.

Mattress fit

Check a mattress against the door opening. Flexible mattresses may bend in real life, so treat the calculator as a conservative guide.

Table fit

Test a dining table, desk or console using its maximum outside dimensions. Removing legs can change the result significantly.

Wardrobe fit

Check wardrobes, cabinets and dressers before carrying them into a room. Measure fixed trim and handles at the widest point.

Custom furniture

Use Custom for boxes, appliances, shelving, storage units or any large rectangular item you need to move through a doorway.

Before you move the furniture

Measure the actual opening

Measure between the narrowest points of the frame with the door fully open. Do not rely only on the advertised door size.

Check the whole route

A piece may clear the doorway but still fail at a hallway corner, stair landing or another door. Check the tightest point on the entire route.

Allow some clearance

A mathematical fit with almost no spare room is not an easy real world fit. Leave extra space for hands, trim, skirting boards and small measuring errors.

How the calculator works

The calculator treats the item as a rectangular box. It tests the length × width, length × height and width × height faces against the doorway. When rotation is enabled it also checks intermediate angles. The hallway check is deliberately conservative because real rooms, corners and furniture shapes vary.

This makes the result useful for planning, but it is not a guarantee. Soft furniture can compress, mattresses can flex and irregular furniture may behave differently from a rectangular box.

Furniture and doorway FAQs

Will my sofa fit through the door?

Enter the sofa length, width and height together with the clear doorway width and height. The calculator checks the main orientations and, when allowed, rotated angles to find a possible fit.

Can a sofa fit through a door narrower than the sofa?

Often, yes. The sofa may fit on its side, stood on one end or rotated through the opening. The important measurements are the cross section facing the doorway and the room available to manoeuvre.

How do I measure a doorway for furniture?

Measure the clear usable width between the narrowest points of the open frame and the clear height from floor to frame. Account for hinges, handles, stops or trim that reduce the opening.

Should I remove sofa legs before measuring?

If the legs can safely be removed and you intend to remove them before moving, measure both ways. A few centimetres can change a tight result.

Does the calculator work for fridges and wardrobes?

Yes. It works best for box shaped items. Use the maximum outside dimensions including fixed handles, hinges or trim.

Can I check a mattress?

Yes. Enter its full dimensions. The calculator treats it as rigid, so a flexible mattress may be easier to manoeuvre than the result suggests.

Why does hallway width matter?

An item can fit through the doorway itself but still need extra space to rotate into the correct position. A narrow hall, stair or landing can therefore prevent a move that looks possible from the door measurements alone.

Is the result guaranteed?

No. The tool is a geometry guide. Real furniture may have curved arms, protruding feet, handles or flexible parts, and real routes can include corners, stairs and uneven floors. Recheck any close result before moving or buying.